Split System Installation Bentleigh

Split System Installation in Bentleigh

There’s nothing better than coming to your home on a hot day of 40 degrees and turning on your split system air conditioning and in just a couple of seconds, the house and your family will be cool.

Split system air conditioning offers this the ability to be used in a variety of ways, making them difficult to beat. Like all heaters and coolers, to ensure they are operating to their maximum they must be serviced and maintained to the highest standard by qualified professionals. Melbourne Gas Heating Pros offers experienced technicians who are familiar with split system air-conditioners inside and out. They specialize in all brands and models providing you with confidence that we will finish the job to professional standards.

We offer a variety of different Split System Installation services which include the following:

• Split System Installation Bentleigh
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling are licensed and certified to handle all kinds of work. If you’re searching for split system installation in Bentleigh services then contact Local Heating and Cooling Professionals Bentleigh today and talk with one of our friendly team members.

How Do Split Systems Operate?

Split air conditioning systems earn the name because of one half of the system (condenser) located outside the house while the other part (fan coil) is located inside. While cooling, hot air that is inside the room is taken in through the fan coil and taken out, resulting into cooling air returning to the house. Reverse cycle allows heating pumps to run in reverse in order to provide warmth in cold weather.

The split system of air conditioning are installed to specific rooms, areas , or rooms joined by copper piping into an outdoor unit (condenser). Multiple-headed split-air conditioning units can be used in more than nine rooms, with only one outdoor unit and allowing for separate temperature control for each room.

What Are The Running Costs With Split Systems?

One of the top brands that we recommend for Split Systems is Mitsubishi Electric. For a Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular cooling and heating throughout the summer and winter months The annual running expense would be measured at $272.34.

Reduced Costs of Split Systems Running Costs

It’s not difficult to lower your running expenses by using a Split System. Depending on the model that you purchaseand its star rating will determine just how much you’ll save per year. However looking beyond the initial price to how you utilize Your Split System can help as well.

Tips For Using Split Systems

• Set the thermostat between 24C and 26, which is the ideal temperature for cooling. Each degree less in summer increases the running cost by around 10%.
• Utilize the economy setting when your split has one. Also, you should regularly check the condition of your air conditioner.
• Keep the sun’s heat out by closing curtains and external blinds in the morning. Close windows and doors to areas being cooled when it is split in operation.
• When the split system has been switched off and its cooler outside, open the doors along with windows, allowing cool air circulate.
• Insulate your property to help keep heat out in summer and inside during winter.
• Dress according to the weather.

Why Choose A Split System?

Wall mounted split air conditioning systems are the most commonly owned residential air conditioning system since they are inexpensive and easy to maintain.

Inverter Technology

Inverter technology is your key to more comfort throughout the year since it keeps the temperature constant, cuts costs (less energy consumption) and produces a lesser amount of noise when it is used. This is achieved by setting the speed of rotation more precisely.

Affordable

Wall-mounted Split AC systems are the most budget option for a small room apartment, small home or even a studio since they are inexpensive to buy (depending on the number of indoor units you need) and they don’t require duct work required.

Independent Temperature Control

Each indoor unit is able to control the area it is installed in, which means that each room can have a distinct temperature.

Air Quality

A lot of Split air conditioners include air filtering and humidity control functions that control the amount of dust and humidity in the space. This provides those with sensitive skin (children older, asthmatic, or allergic users) the peace of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems enable multiple indoor units to be connected to one outdoor condenser, that in turn provides you with satisfaction of having the perfect AC (in terms of physical and output constraints) for a particular room.

Split System FAQ

Is a split system the same thing as one would expect from an air conditioner?

Absolutely, Split System is an air conditioning system. However, there are many kinds of air conditioning systems. This includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

Each system operates using refrigerant and electricity, based on the same principle, but are different in terms of installation.

How long does it take to install a split system air conditioner?

Generally speaking the typical split system air conditioning installation should take between 3-6 hours. But, the exact amount of time can vary based upon a number of variables, including below;

• Size and location of both the outdoor and indoor unit
• The copper pipes are routed between the outdoor unit and indoor unit
• Electrical connections from the main switchboards to A/C unit

More Split System FAQ's

Do I need to replace or fix my AC unit?

In the majority of cases, if your air conditioner is over > 10 years of age and has apparent issues with your air conditioner there’s a good possibility that it will be cheaper to replace then repair.

In order to help you make the best decision To make the right choice, consult with the staff at ComfyHome to give you an honest assessment on the condition of your air conditioner.

What size of split system air conditioning will I require?

A standard measurements ratio is multiple the space by a factor of 0.15 to obtain the required power of the unit in kilowatt.

For a room area that is 40 sqm, you’ll require a split system air conditioning unit with 6 kW. A cooling unit of 2.5kW is suitable for 10-20 square meter room spaces.

However, the amount of the Split system’s air conditioning requirements will also be affected by other factors like the insulation of the room, the quantity of residents and’ location.

For an accurate assessment of the Split dimension, we suggest you get in touch with us to request a thorough analysis.

More Split System FAQ's

How long does an air conditioner split system last?

In general, an air conditioner is built to last 10-20 years on average. But this depends on a lot of things like the model of the AC and the quality of the installation, routine maintenance history and more…

It is important to service your split system air conditioner often to prolong lifetime and enhance effectiveness.

What is the best frequency to wash my air conditioner air filter?

As per Daikin Australia, it is strongly suggested that you should take care to clean your air conditioning filter every two weeks in order to boost the efficiency of the system, and ultimately decrease your energy use by 5%-15%.

Bentleigh Gas Heating Services

• Bentleigh
• Gas Hot Water System Installation & Repairs Bentleigh
• Braemar Ducted Gas Heating Servicing & Repair Bentleigh
• Gas Space Heater Repair Bentleigh
• Gas Heating Repairs Bentleigh
• Gas Log Fire Service & Repairs Bentleigh
• Gas Heating Service Bentleigh
• Gas Heating Bentleigh
• Evaporative Cooling Repair Bentleigh
• Brivis Ducted Gas Heating Servicing & Repair Bentleigh
• Ducted Gas Heating Servicing & Repair Bentleigh
• Carbon Monoxide Testing Bentleigh
• Gas Appliance Servicing & Repair Bentleigh
• Vulcan Ducted Gas Heating Servicing & Repair Bentleigh
• Gas Heating Installation Bentleigh

What Types of Systems We Service & Repair

Every brand and type of heating comes with its specific operation and maintenance needs; our experienced technicians have the insight and know how to provide the best service for all heating systems which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has years of experience in heating repairs and maintenance, specialising in all styles and types of heating systems. We take pride in a quick response time and commitment to excellence, efficiency , and reliability.

We are able to service and maintain the majority of leading brands of heating units and systems that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Competitive Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Excellent Reputation & Reviews
• We’re personable and friendly
• Experienced & Licenced Team
• Get a Quote Without Obligation

Our Promise To You

At Melbourne Gas Heating Pros we understand the frustration of not having hot water and it’s something that we would never want anyone to need to go through. This is the reason we place an emphasis for hot water emergencies. All of our experienced plumbers are trustworthy and friendly, without a doubt we will be able to assist you in any circumstance.

We pride ourselves on the quality of our customer service. It is our conviction that the minor things matter most.

We are proud of our outstanding customer service. this is why our customers are so happy with us:

• We always show up when tell you we will.
• Our staff will give you their number when they’re 30 minutes away.
• Competitive pricing upfront and expert advice before we start the job.
• Always taking care to clean up after our own mess.

Our company Melbourne Gas Heating Pros offer emergency and maintenance services for plumbing, electrical, and heating. If you are unsure about our services or what we can offer, please contact us.