Split System Installation Belgrave Heights

Split System Installation in Belgrave Heights

There’s nothing more satisfying than coming home on a hot day of 40 degrees and activating your split system air-conditioning and within a matter of minutes , your home and your family is cool.

Split system air-conditioning provides this versatility, making them hard to beat. But like all heaters and coolers to make sure they’re running at their peak they must be checked and maintained to the highest standard by qualified professionals. Melbourne Gas Heating Pros offers experienced technicians who are familiar with split system air-conditioners from top to bottom. They specialize in all models and models of these units giving you the peace of mind that we will finish the job to a professional standard.

We provide a range of services that include the following:

• Split System Installation Belgrave Heights
• Split System Repairs
• Split System Servicing

Our team comprised of HVAC and Cooling experts are fully qualified and licensed to perform all kinds of tasks. If you are looking for split system installation Belgrave Heights services then contact Local Heating and Cooling Professionals Belgrave Heights today and talk with one of our helpful team members.

How Do Split Systems Operate?

Systems for split air conditioners get their name due to half it (condenser) being located outside the home, while the other part (fan coil) is installed inside. When it cools, warm air from inside the room is absorbed from the fan coil, and then is then removed, which results in cool air being recirculated back into the house. In reverse mode, it allows your heat pump run in reverse to provide heating in cold weather.

Split air conditioning systems can be placed in rooms, areas or multiple rooms joined by copper piping to an outdoor unit (condenser). Systems with multi-head splits can be set up for as many as nine rooms using just one outdoor unit permitting the control of temperature for each room.

What Are The Running Costs For Split Systems?

One of the brands we recommend that we recommend for Split Systems is Mitsubishi Electric. If you are looking for an Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular cooling and heating throughout the summer and winter time, the annual running cost would be $272.34.

Reduced Costs of Split Systems Operating Costs

It’s not hard to save on running expenses by using the Split System. Depending on the model that you purchaseand its star rating, you will be able to determine how much you’ll save per year. It is important to look beyond the initial cost and how you make use of the Split System can help as well.

Tips For Operating A Split System

• Set the thermostat between 24C and 26C to cool. Any degree lower than that will increase the running costs by around 10%.
• Utilize the economy setting if your split system has one and regularly service your air conditioner.
• Keep the sun’s heat away by closing the curtains and exterior blinds in the morning. Close the doors and windows of areas that are being cooled while your split systems are on.
• When the split system is switched off , and the cooler outside, it is recommended to open the doors along with windows, allowing the cool air inside.
• Insulate your residence to prevent the cool summer air out and keep the heat inside in winter.
• Dress to suit the weather.

Why Choose Split Systems?

Wall mounted split air conditioning systems are the most frequently used residential air conditioning system because they’re affordable and easy to maintain.

Inverter Technology

Inverter technology is your key to more comfort throughout the year as it maintains a constant temperature, saves costs (less consumption of energy) and generates less noise when used. This is achieved through managing the speed of the compressor more precisely.

Affordable

Wall mounted divided AC units are your most affordable option for a one room apartment, small home or even a studio as they are relatively cheap to buy (depending on the number of indoor units you will require) and don’t need installation of ducts.

Independent Temperature Control

Each indoor unit is able to control the temperature of the room it is situated in, which means that each room is able to have distinct temperature.

Air Quality

Many Split air conditioners feature air filtering and humidity control functions which regulate the amount of dust and humidity within a room. This allows for sensitive customers (children or elderly, asthmatic or allergic customers) an ease of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to connect to one outdoor condenser that in turn provides you with the peace of mind that you have the most suitable Air conditioner (in terms of physical and output constraints) to a specific space.

Split System FAQ

Are split systems the same as one would expect from an air conditioner?

Yes, Split System includes an air-conditioning unit. However, there are different kinds of air conditioning systems. These which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

Each system operates on electricity & refrigerant under the same principal but very different in terms of installation.

How long will it take to set up a split system air conditioner?

In general for a single split system air conditioning installation should last between 3 and 6 hours. However, the exact amount of time will depend upon a number of variables, including below:

• The size and location of both the outdoor and indoor unit
• The copper pipes are routed between the outdoor unit and the indoor unit
• Electrical connections from main switchboards to A/C unit.

More Split System FAQ's

Do I need to replace or fix the air conditioning unit in my home?

In the majority of cases the A/C is more than 10 years and you notice evident issues with the A/C, there is a good possibility that it will be less expensive to replace it than to repair it.

To assist you in making the best decision for your needs, consult with the staff at ComfyHome to provide you with an honest opinion on the condition of your air conditioner.

What size split system air conditioning will I require?

A standard measurement ratio is to multiply the area of the room by a factor of 0.15 to obtain the required power of the device in kilowatts.

For a space of 40 square metres, you’ll need a Split system air conditioning unit that is 6 kW. A unit that can cool the air at 2.5kW is perfect for 10-20 sqm rooms areas.

However, the size of the Split system’s air conditioning requirements can also be dependent on other factors such as how well the insulation is in place, the quantity of residents and’ position.

For a precise assessment of the Split unit size, please call us for a more detailed analysis.

More Split System FAQ's

How long can an air conditioner split system last?

In general, an air conditioner is built to last 10-20 years, on an average. However, it is contingent on a variety of elements, such as the manufacturer of the air conditioner it is installed on, the quality of its installation, regular service history, etc…

It is essential to service your split system air conditioner often to prolong lifetime and enhance effectiveness.

How often should I wash my air conditioner air filter?

As per Daikin Australia, it is strongly suggested that you should take care to clean your air conditioning filter every two weeks in order to boost the efficiency of the system, and ultimately reduce your energy usage by 5%-15 percentage.

Belgrave Heights Gas Heating Services

• Evaporative Cooling Repair Belgrave Heights
• Vulcan Ducted Gas Heating Servicing & Repair Belgrave Heights
• Gas Space Heater Repair Belgrave Heights
• Ducted Gas Heating Servicing & Repair Belgrave Heights
• Gas Heating Belgrave Heights
• Gas Appliance Servicing & Repair Belgrave Heights
• Braemar Ducted Gas Heating Servicing & Repair Belgrave Heights
• Gas Heating Service Belgrave Heights
• Carbon Monoxide Testing Belgrave Heights
• Brivis Ducted Gas Heating Servicing & Repair Belgrave Heights
• Gas Hot Water System Installation & Repairs Belgrave Heights
• Belgrave Heights
• Gas Heating Installation Belgrave Heights
• Gas Log Fire Service & Repairs Belgrave Heights
• Gas Heating Repairs Belgrave Heights

What Types of Systems We Service & Repair

Each model and brand of heating comes with its own operation and maintenance; our experienced technicians are equipped with the expertise and experience to offer excellent services to all systems of heating which includes:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has a wealth of experience in heating repairs and maintenance and specialize in all types and types of heating systems. We pride ourselves on having a rapid response time and dedication to efficiency, excellence and reliability.

We service and maintain the leading brands of heating units and systems such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Low Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Great Reviews & Reputation
• We’re personable and friendly
• Professionally trained and licensed team
• Get a Free Quote and No obligation

Our Promise To You

We at Melbourne Gas Heating Pros we understand the frustration of not having hot water, and it’s something that we would never want anyone to suffer through. This is why we put such a high priority on hot water emergencies. Our experienced plumbers are courteous and reliable and without doubt, we can assist with any emergency.

We are proud of our customer service and it is our belief that the small things count the most.

We are proud of our exceptional customer service. and here’s the reason our customers appreciate us:

• We always arrive when we tell you we will.
• Our techs will give you a the number to call them when they are 30 minutes away.
• Pricing upfront competitive and guidance before we even begin the job.
• Always making sure we clean up after ourselves.

We at Melbourne Gas Heating Pros offer emergency and maintenance services for electrical, plumbing and heating. If at any time you are unsure about our services or what we offer.