Split System Installation Ashwood

Split System Installation in Ashwood

There’s nothing more satisfying than coming home to a day of 40 degrees and flipping on your split-system air conditioning and in a matter of minutes , your home and your family is cool.

Split system air-conditioning provides this flexibility, which makes them difficult to beat. But like all heaters and coolers that are required to run to their maximum they must be maintained and serviced to a high standard by qualified professionals. Melbourne Gas Heating Pros offers experienced technicians who know split system air-conditioners inside and out. They specialize in all models and models providing you with peace of mind that we will complete the task at a professional level.

We offer a variety of services that include the following:

• Split System Installation Ashwood
• Split System Repairs
• Split System Servicing

Our team of professionals in the field of heating and cooling are fully qualified and licensed to complete all types of tasks. If you’re in search of [keywords lower] Ashwood services then contact Local Heating and Cooling Professionals Ashwood today and talk with one of our friendly team members.

How Do Split Systems Work?

Systems for split air conditioners earn their name because half of the system (condenser) being outside the house while the other part (fan coil) is located inside. When it cools, warm air in the room is taken in through the fan coil and taken out, resulting into cooling air returning to the house. While reverse cycle allows for your heat pump run in reverse in order to provide warmth on cold winter days.

The split system of air conditioning can be installed in individual rooms, areas , or rooms linked by copper pipe with an outside unit (condenser). Multiple-headed split-air conditioning units can be set up in more than nine rooms, with only one outdoor unit and allowing for the control of temperature for each room.

What Are The Running Costs For Split Systems?

One of the most recommended brands to use for Split Systems is Mitsubishi Electric. If you are looking for an Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular heating & cooling during the summer and winter seasons, the annual running cost would be $272.34.

The reduction of split system Operating Costs

It’s easy to cut down on your operating costs with a Split System. The model you buy, as well as its star rating will determine just how much you can save annually. However looking beyond the initial cost to how you will use Your Split System can help as well.

Tips For Operating Split Systems

• Set the thermostat between 24C and 26, which is the ideal temperature for cooling. Every degree lower during summer increases the running cost by approximately 10%..
• Choose the economy option If your split system comes with one. Also, you should regularly check the condition of your air cooling system.
• Keep the sun’s heat away by closing curtains and external blinds during the day. Close windows and doors to areas that are cooling when you have the split unit in operation.
• If the split system is switched off , and the cooler outside, open the doors as well as windows in order to let cool air flow in.
• Insulate your house to block cool summer air out and keep the heat in the winter months.
• Dress according to the weather conditions.

Why Choose Split Systems?

The wall mounted air conditioning system is the most frequently used air conditioning systems for homes because they’re affordable and simple to maintain.

Inverter Technology

Inverter technology is the mainstay for comfort all through the year because it maintains the temperature constant, cuts costs (less energy consumption) and produces relatively less noise when it is used. This is achieved by setting the speed of rotation more precisely.

Affordable

Wall-mounted divided AC models are best affordable option for a one room or apartment as they are relatively cheap to purchase (depending on the amount of indoor units you require) and don’t need duct work required.

Independent Temperature Control

Each indoor unit has the ability to control the area it is situated in, so each room may have different temperatures.

Air Quality

Many HVAC systems that are split feature air filtering and humidity control functions that regulate the amount of dust and humidity that can be found in the room. This provides those with sensitive skin (children older, asthmatic, or allergic users) an ease of body and mind.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to connect to one outdoor condenser, that in turn provides you with the convenience of having the most suitable Air conditioner (in terms of output and physical constraints) for a specific room.

Split System FAQ

Is a split system similar to one would expect from an air conditioner?

Absolutely, Split System can be described as an air conditioner system. But, the different kinds of air conditioning systems. This includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

All these systems operate using refrigerant and electricity, based on the same principle but they are different in terms.

What is the time frame to set up a split system air conditioner?

In general an individual split air conditioning system installation is expected to take between 3-6 hours. The exact length of time could vary based on various factors like below;

• The size and location of both the outdoor and indoor unit
• The route of copper pipes between the outdoor unit and indoor unit
• Electrical connections from main switchboards to A/C unit.

More Split System FAQ's

Do I need to replace or fix my cooling system?

In most situation the air conditioner is over > 10-years-old and has obvious issues with your AC there’s a great chance that it’s less expensive to replace it than to repair it.

To help you make the best decision for your needs, contact the experts at ComfyHome to get an honest opinion on the condition of your air conditioner.

What size of split system air conditioner will I require?

A common measuring ratio will multiply the size of the room by a factor of 0.15 in order to determine the power of the measurement unit in kilowatts.

For a room with a size of 40 square meters, you will have a Split system air conditioning unit with 6 kW. A cooling unit of 2.5kW is ideal for rooms with 10-20 square meters. spaces.

However, the amount of the Split system’s air conditioning requirements will also be affected by other factors like the insulation of the room, the size of the room, and’ place of residence.

For an accurate assessment of the Split units size we suggest you contact us for a comprehensive analysis.

More Split System FAQ's

How long does an air conditioner split system last?

In general air conditioners are built to last from 10-20 years on an average. But this depends on a lot of things like the brand of the A/C and the quality of the installation, the routine maintenance history etc…

It is essential to service Your Split System AC frequently for a longer life span and to increase effectiveness.

How often should I wash my air conditioner air filter?

Based on Daikin Australia, it is strongly recommended that you wash your air conditioner’s filters every 2 weeks to increase the efficiency of the system and decrease your energy use by 5%-15 15%.

Ashwood Gas Heating Services

• Gas Heating Repairs Ashwood
• Gas Appliance Servicing & Repair Ashwood
• Carbon Monoxide Testing Ashwood
• Ashwood
• Gas Space Heater Repair Ashwood
• Evaporative Cooling Repair Ashwood
• Gas Heating Installation Ashwood
• Gas Heating Ashwood
• Gas Log Fire Service & Repairs Ashwood
• Brivis Ducted Gas Heating Servicing & Repair Ashwood
• Gas Heating Service Ashwood
• Braemar Ducted Gas Heating Servicing & Repair Ashwood
• Ducted Gas Heating Servicing & Repair Ashwood
• Vulcan Ducted Gas Heating Servicing & Repair Ashwood
• Gas Hot Water System Installation & Repairs Ashwood

What Types of Systems We Service & Repair

Every brand and type of heating comes with its own maintenance and operation Our experienced technicians have the knowledge and expertise to provide the best service on all types of heating equipment for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team is well-versed and has years of experience in repairs and maintenance of heating systems and specialize in all types and brands of heating equipment. We pride ourselves on a fast response time and dedication to efficiency, excellence and reliability.

We service and maintain all leading brands of heating systems and units such as:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Low Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Excellent Reviews & Reputation
• We’re friendly, personable and polite.
• Experienced & Licenced Team
• Request a Quote with No obligation

Our Promise To You

At Melbourne Gas Heating Pros we understand the discomfort of not having hot water, and it’s something we don’t think anyone should need to go through. This is why we place top priority on emergencies with hot water. Our plumbers are reliable and friendly and without doubt, we will be able to help you in all situations.

We take pride in our customer service , and it is our belief that the minor things matter most.

We pride ourselves on our great customer service, this is why our customers love us:

• We will always be there when we say we will.
• Our technicians will give you an appointment when they are thirty minutes away.
• Upfront competitive pricing and advice before we begin the work.
• Always taking care to clean up after ourselves.

Our company Melbourne Gas Heating Pros offer emergency and maintenance services in plumbing, heating, and electrical. If you are unsure about our services or what we offer.